AutoCloseable@Generated("software.amazon.awssdk:codegen") public interface Route53AsyncClient extends AutoCloseable
builder() method.
null| Modifier and Type | Method | Description |
|---|---|---|
default CompletableFuture<AssociateVPCWithHostedZoneResponse> |
associateVPCWithHostedZone(AssociateVPCWithHostedZoneRequest associateVPCWithHostedZoneRequest) |
Associates an Amazon VPC with a private hosted zone.
|
static Route53AsyncClientBuilder |
builder() |
Create a builder that can be used to configure and create a
Route53AsyncClient. |
default CompletableFuture<ChangeResourceRecordSetsResponse> |
changeResourceRecordSets(ChangeResourceRecordSetsRequest changeResourceRecordSetsRequest) |
Creates, changes, or deletes a resource record set, which contains authoritative DNS information for a specified
domain name or subdomain name.
|
default CompletableFuture<ChangeTagsForResourceResponse> |
changeTagsForResource(ChangeTagsForResourceRequest changeTagsForResourceRequest) |
Adds, edits, or deletes tags for a health check or a hosted zone.
|
static Route53AsyncClient |
create() |
Create a
Route53AsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider. |
default CompletableFuture<CreateHealthCheckResponse> |
createHealthCheck(CreateHealthCheckRequest createHealthCheckRequest) |
Creates a new health check.
|
default CompletableFuture<CreateHostedZoneResponse> |
createHostedZone(CreateHostedZoneRequest createHostedZoneRequest) |
Creates a new public hosted zone, which you use to specify how the Domain Name System (DNS) routes traffic on the
Internet for a domain, such as example.com, and its subdomains.
|
default CompletableFuture<CreateReusableDelegationSetResponse> |
createReusableDelegationSet(CreateReusableDelegationSetRequest createReusableDelegationSetRequest) |
Creates a delegation set (a group of four name servers) that can be reused by multiple hosted zones.
|
default CompletableFuture<CreateTrafficPolicyResponse> |
createTrafficPolicy(CreateTrafficPolicyRequest createTrafficPolicyRequest) |
Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as
example.com) or one subdomain name (such as www.example.com).
|
default CompletableFuture<CreateTrafficPolicyInstanceResponse> |
createTrafficPolicyInstance(CreateTrafficPolicyInstanceRequest createTrafficPolicyInstanceRequest) |
Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy
version.
|
default CompletableFuture<CreateTrafficPolicyVersionResponse> |
createTrafficPolicyVersion(CreateTrafficPolicyVersionRequest createTrafficPolicyVersionRequest) |
Creates a new version of an existing traffic policy.
|
default CompletableFuture<CreateVPCAssociationAuthorizationResponse> |
createVPCAssociationAuthorization(CreateVPCAssociationAuthorizationRequest createVPCAssociationAuthorizationRequest) |
Authorizes the AWS account that created a specified VPC to submit an
AssociateVPCWithHostedZone
request to associate the VPC with a specified hosted zone that was created by a different account. |
default CompletableFuture<DeleteHealthCheckResponse> |
deleteHealthCheck(DeleteHealthCheckRequest deleteHealthCheckRequest) |
Deletes a health check.
|
default CompletableFuture<DeleteHostedZoneResponse> |
deleteHostedZone(DeleteHostedZoneRequest deleteHostedZoneRequest) |
Deletes a hosted zone.
|
default CompletableFuture<DeleteReusableDelegationSetResponse> |
deleteReusableDelegationSet(DeleteReusableDelegationSetRequest deleteReusableDelegationSetRequest) |
Deletes a reusable delegation set.
|
default CompletableFuture<DeleteTrafficPolicyResponse> |
deleteTrafficPolicy(DeleteTrafficPolicyRequest deleteTrafficPolicyRequest) |
Deletes a traffic policy.
|
default CompletableFuture<DeleteTrafficPolicyInstanceResponse> |
deleteTrafficPolicyInstance(DeleteTrafficPolicyInstanceRequest deleteTrafficPolicyInstanceRequest) |
Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you
created the instance.
|
default CompletableFuture<DeleteVPCAssociationAuthorizationResponse> |
deleteVPCAssociationAuthorization(DeleteVPCAssociationAuthorizationRequest deleteVPCAssociationAuthorizationRequest) |
Removes authorization to submit an
AssociateVPCWithHostedZone request to associate a specified VPC
with a hosted zone that was created by a different account. |
default CompletableFuture<DisassociateVPCFromHostedZoneResponse> |
disassociateVPCFromHostedZone(DisassociateVPCFromHostedZoneRequest disassociateVPCFromHostedZoneRequest) |
Disassociates a VPC from a Amazon Route 53 private hosted zone.
|
default CompletableFuture<GetChangeResponse> |
getChange(GetChangeRequest getChangeRequest) |
Returns the current status of a change batch request.
|
default CompletableFuture<GetCheckerIpRangesResponse> |
getCheckerIpRanges(GetCheckerIpRangesRequest getCheckerIpRangesRequest) |
GetCheckerIpRanges still works, but we recommend that you download ip-ranges.json, which includes IP
address ranges for all AWS services. |
default CompletableFuture<GetGeoLocationResponse> |
getGeoLocation(GetGeoLocationRequest getGeoLocationRequest) |
Gets information about whether a specified geographic location is supported for Amazon Route 53 geolocation
resource record sets.
|
default CompletableFuture<GetHealthCheckResponse> |
getHealthCheck(GetHealthCheckRequest getHealthCheckRequest) |
Gets information about a specified health check.
|
default CompletableFuture<GetHealthCheckCountResponse> |
getHealthCheckCount(GetHealthCheckCountRequest getHealthCheckCountRequest) |
Retrieves the number of health checks that are associated with the current AWS account.
|
default CompletableFuture<GetHealthCheckLastFailureReasonResponse> |
getHealthCheckLastFailureReason(GetHealthCheckLastFailureReasonRequest getHealthCheckLastFailureReasonRequest) |
Gets the reason that a specified health check failed most recently.
|
default CompletableFuture<GetHealthCheckStatusResponse> |
getHealthCheckStatus(GetHealthCheckStatusRequest getHealthCheckStatusRequest) |
Gets status of a specified health check.
|
default CompletableFuture<GetHostedZoneResponse> |
getHostedZone(GetHostedZoneRequest getHostedZoneRequest) |
Gets information about a specified hosted zone including the four name servers assigned to the hosted zone.
|
default CompletableFuture<GetHostedZoneCountResponse> |
getHostedZoneCount(GetHostedZoneCountRequest getHostedZoneCountRequest) |
Retrieves the number of hosted zones that are associated with the current AWS account.
|
default CompletableFuture<GetReusableDelegationSetResponse> |
getReusableDelegationSet(GetReusableDelegationSetRequest getReusableDelegationSetRequest) |
Retrieves information about a specified reusable delegation set, including the four name servers that are
assigned to the delegation set.
|
default CompletableFuture<GetTrafficPolicyResponse> |
getTrafficPolicy(GetTrafficPolicyRequest getTrafficPolicyRequest) |
Gets information about a specific traffic policy version.
|
default CompletableFuture<GetTrafficPolicyInstanceResponse> |
getTrafficPolicyInstance(GetTrafficPolicyInstanceRequest getTrafficPolicyInstanceRequest) |
Gets information about a specified traffic policy instance.
|
default CompletableFuture<GetTrafficPolicyInstanceCountResponse> |
getTrafficPolicyInstanceCount(GetTrafficPolicyInstanceCountRequest getTrafficPolicyInstanceCountRequest) |
Gets the number of traffic policy instances that are associated with the current AWS account.
|
default CompletableFuture<ListGeoLocationsResponse> |
listGeoLocations(ListGeoLocationsRequest listGeoLocationsRequest) |
Retrieves a list of supported geo locations.
|
default CompletableFuture<ListHealthChecksResponse> |
listHealthChecks(ListHealthChecksRequest listHealthChecksRequest) |
Retrieve a list of the health checks that are associated with the current AWS account.
|
default CompletableFuture<ListHostedZonesResponse> |
listHostedZones(ListHostedZonesRequest listHostedZonesRequest) |
Retrieves a list of the public and private hosted zones that are associated with the current AWS account.
|
default CompletableFuture<ListHostedZonesByNameResponse> |
listHostedZonesByName(ListHostedZonesByNameRequest listHostedZonesByNameRequest) |
Retrieves a list of your hosted zones in lexicographic order.
|
default CompletableFuture<ListResourceRecordSetsResponse> |
listResourceRecordSets(ListResourceRecordSetsRequest listResourceRecordSetsRequest) |
Lists the resource record sets in a specified hosted zone.
|
default CompletableFuture<ListReusableDelegationSetsResponse> |
listReusableDelegationSets(ListReusableDelegationSetsRequest listReusableDelegationSetsRequest) |
Retrieves a list of the reusable delegation sets that are associated with the current AWS account.
|
default CompletableFuture<ListTagsForResourceResponse> |
listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest) |
Lists tags for one health check or hosted zone.
|
default CompletableFuture<ListTagsForResourcesResponse> |
listTagsForResources(ListTagsForResourcesRequest listTagsForResourcesRequest) |
Lists tags for up to 10 health checks or hosted zones.
|
default CompletableFuture<ListTrafficPoliciesResponse> |
listTrafficPolicies(ListTrafficPoliciesRequest listTrafficPoliciesRequest) |
Gets information about the latest version for every traffic policy that is associated with the current AWS
account.
|
default CompletableFuture<ListTrafficPolicyInstancesResponse> |
listTrafficPolicyInstances(ListTrafficPolicyInstancesRequest listTrafficPolicyInstancesRequest) |
Gets information about the traffic policy instances that you created by using the current AWS account.
|
default CompletableFuture<ListTrafficPolicyInstancesByHostedZoneResponse> |
listTrafficPolicyInstancesByHostedZone(ListTrafficPolicyInstancesByHostedZoneRequest listTrafficPolicyInstancesByHostedZoneRequest) |
Gets information about the traffic policy instances that you created in a specified hosted zone.
|
default CompletableFuture<ListTrafficPolicyInstancesByPolicyResponse> |
listTrafficPolicyInstancesByPolicy(ListTrafficPolicyInstancesByPolicyRequest listTrafficPolicyInstancesByPolicyRequest) |
Gets information about the traffic policy instances that you created by using a specify traffic policy version.
|
default CompletableFuture<ListTrafficPolicyVersionsResponse> |
listTrafficPolicyVersions(ListTrafficPolicyVersionsRequest listTrafficPolicyVersionsRequest) |
Gets information about all of the versions for a specified traffic policy.
|
default CompletableFuture<ListVPCAssociationAuthorizationsResponse> |
listVPCAssociationAuthorizations(ListVPCAssociationAuthorizationsRequest listVPCAssociationAuthorizationsRequest) |
Gets a list of the VPCs that were created by other accounts and that can be associated with a specified hosted
zone because you've submitted one or more
CreateVPCAssociationAuthorization requests. |
default CompletableFuture<TestDNSAnswerResponse> |
testDNSAnswer(TestDNSAnswerRequest testDNSAnswerRequest) |
Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type.
|
default CompletableFuture<UpdateHealthCheckResponse> |
updateHealthCheck(UpdateHealthCheckRequest updateHealthCheckRequest) |
Updates an existing health check.
|
default CompletableFuture<UpdateHostedZoneCommentResponse> |
updateHostedZoneComment(UpdateHostedZoneCommentRequest updateHostedZoneCommentRequest) |
Updates the comment for a specified hosted zone.
|
default CompletableFuture<UpdateTrafficPolicyCommentResponse> |
updateTrafficPolicyComment(UpdateTrafficPolicyCommentRequest updateTrafficPolicyCommentRequest) |
Updates the comment for a specified traffic policy version.
|
default CompletableFuture<UpdateTrafficPolicyInstanceResponse> |
updateTrafficPolicyInstance(UpdateTrafficPolicyInstanceRequest updateTrafficPolicyInstanceRequest) |
Updates the resource record sets in a specified hosted zone that were created based on the settings in a
specified traffic policy version.
|
closestatic Route53AsyncClient create()
Route53AsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider.static Route53AsyncClientBuilder builder()
Route53AsyncClient.default CompletableFuture<AssociateVPCWithHostedZoneResponse> associateVPCWithHostedZone(AssociateVPCWithHostedZoneRequest associateVPCWithHostedZoneRequest)
Associates an Amazon VPC with a private hosted zone.
To perform the association, the VPC and the private hosted zone must already exist. You can't convert a public hosted zone into a private hosted zone.
If you want to associate a VPC that was created by using one AWS account with a private hosted zone that was
created by using a different account, the AWS account that created the private hosted zone must first submit a
CreateVPCAssociationAuthorization request. Then the account that created the VPC must submit an
AssociateVPCWithHostedZone request.
associateVPCWithHostedZoneRequest - A complex type that contains information about the request to associate a VPC with a private hosted zone.Public hosted zone: Two hosted zones that have the same name or that have a parent/child relationship (example.com and test.example.com) can't have any common name servers. You tried to create a hosted zone that has the same name as an existing hosted zone or that's the parent or child of an existing hosted zone, and you specified a delegation set that shares one or more name servers with the existing hosted zone.
Private hosted zone: You specified an Amazon VPC that you're already using for another hosted zone, and the domain that you specified for one of the hosted zones is a subdomain of the domain that you specified for the other hosted zone. For example, you can't use the same Amazon VPC for the hosted zones for example.com and test.example.com.
default CompletableFuture<ChangeResourceRecordSetsResponse> changeResourceRecordSets(ChangeResourceRecordSetsRequest changeResourceRecordSetsRequest)
Creates, changes, or deletes a resource record set, which contains authoritative DNS information for a specified
domain name or subdomain name. For example, you can use ChangeResourceRecordSets to create a
resource record set that routes traffic for test.example.com to a web server that has an IP address of
192.0.2.44.
Change Batches and Transactional Changes
The request body must include a document with a ChangeResourceRecordSetsRequest element. The request
body contains a list of change items, known as a change batch. Change batches are considered transactional
changes. When using the Amazon Route 53 API to change resource record sets, Amazon Route 53 either makes all or
none of the changes in a change batch request. This ensures that Amazon Route 53 never partially implements the
intended changes to the resource record sets in a hosted zone.
For example, a change batch request that deletes the CNAME record for www.example.com and creates an
alias resource record set for www.example.com. Amazon Route 53 deletes the first resource record set and creates
the second resource record set in a single operation. If either the DELETE or the
CREATE action fails, then both changes (plus any other changes in the batch) fail, and the original
CNAME record continues to exist.
Due to the nature of transactional changes, you can't delete the same resource record set more than once in a
single change batch. If you attempt to delete the same change batch more than once, Amazon Route 53 returns an
InvalidChangeBatch error.
Traffic Flow
To create resource record sets for complex routing configurations, use either the traffic flow visual editor in the Amazon Route 53 console or the API actions for traffic policies and traffic policy instances. Save the configuration as a traffic policy, then associate the traffic policy with one or more domain names (such as example.com) or subdomain names (such as www.example.com), in the same hosted zone or in multiple hosted zones. You can roll back the updates if the new configuration isn't performing as expected. For more information, see Using Traffic Flow to Route DNS Traffic in the Amazon Route 53 Developer Guide.
Create, Delete, and Upsert
Use ChangeResourceRecordsSetsRequest to perform the following actions:
CREATE: Creates a resource record set that has the specified values.
DELETE: Deletes an existing resource record set that has the specified values.
UPSERT: If a resource record set does not already exist, AWS creates it. If a resource set does
exist, Amazon Route 53 updates it with the values in the request.
Syntaxes for Creating, Updating, and Deleting Resource Record Sets
The syntax for a request depends on the type of resource record set that you want to create, delete, or update, such as weighted, alias, or failover. The XML elements in your request must appear in the order listed in the syntax.
For an example for each type of resource record set, see "Examples."
Don't refer to the syntax in the "Parameter Syntax" section, which includes all of the elements for every kind of
resource record set that you can create, delete, or update by using ChangeResourceRecordSets.
Change Propagation to Amazon Route 53 DNS Servers
When you submit a ChangeResourceRecordSets request, Amazon Route 53 propagates your changes to all
of the Amazon Route 53 authoritative DNS servers. While your changes are propagating, GetChange
returns a status of PENDING. When propagation is complete, GetChange returns a status
of INSYNC. Changes generally propagate to all Amazon Route 53 name servers within 60 seconds. For
more information, see GetChange.
Limits on ChangeResourceRecordSets Requests
For information about the limits on a ChangeResourceRecordSets request, see Limits in the Amazon
Route 53 Developer Guide.
changeResourceRecordSetsRequest - A complex type that contains change information for the resource record set.DeleteHealthCheck request.HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
for the same request, we recommend that you wait, in intervals of increasing duration, before you try the
request again.default CompletableFuture<ChangeTagsForResourceResponse> changeTagsForResource(ChangeTagsForResourceRequest changeTagsForResourceRequest)
Adds, edits, or deletes tags for a health check or a hosted zone.
For information about using tags for cost allocation, see Using Cost Allocation Tags in the AWS Billing and Cost Management User Guide.
changeTagsForResourceRequest - A complex type that contains information about the tags that you want to add, edit, or delete.DeleteHealthCheck request.HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
for the same request, we recommend that you wait, in intervals of increasing duration, before you try the
request again.default CompletableFuture<CreateHealthCheckResponse> createHealthCheck(CreateHealthCheckRequest createHealthCheckRequest)
Creates a new health check.
For information about adding health checks to resource record sets, see ResourceRecordSet$HealthCheckId in ChangeResourceRecordSets.
ELB Load Balancers
If you're registering EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you configure settings for an ELB health check, which performs a similar function to an Amazon Route 53 health check.
Private Hosted Zones
You can associate health checks with failover resource record sets in a private hosted zone. Note the following:
Amazon Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you must assign a public IP address to the instance in the VPC.
You can configure a health checker to check the health of an external resource that the instance relies on, such as a database server.
You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is
based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the
Amazon EC2 StatusCheckFailed metric, add an alarm to the metric, and then create a health check that
is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the
CloudWatch console, see the Amazon CloudWatch
User Guide.
createHealthCheckRequest - A complex type that contains the health check request information.
The same value for CallerReference as an existing health check, and one or more values that
differ from the existing health check that has the same caller reference.
The same value for CallerReference as a health check that you created and later deleted,
regardless of the other settings in the request.
default CompletableFuture<CreateHostedZoneResponse> createHostedZone(CreateHostedZoneRequest createHostedZoneRequest)
Creates a new public hosted zone, which you use to specify how the Domain Name System (DNS) routes traffic on the Internet for a domain, such as example.com, and its subdomains.
You can't convert a public hosted zones to a private hosted zone or vice versa. Instead, you must create a new hosted zone with the same name and create new resource record sets.
For more information about charges for hosted zones, see Amazon Route 53 Pricing.
Note the following:
You can't create a hosted zone for a top-level domain (TLD).
Amazon Route 53 automatically creates a default SOA record and four NS records for the zone. For more information about SOA and NS records, see NS and SOA Records that Amazon Route 53 Creates for a Hosted Zone in the Amazon Route 53 Developer Guide.
If you want to use the same name servers for multiple hosted zones, you can optionally associate a reusable
delegation set with the hosted zone. See the DelegationSetId element.
If your domain is registered with a registrar other than Amazon Route 53, you must update the name servers with your registrar to make Amazon Route 53 your DNS service. For more information, see Configuring Amazon Route 53 as your DNS Service in the Amazon Route 53 Developer Guide.
When you submit a CreateHostedZone request, the initial status of the hosted zone is
PENDING. This means that the NS and SOA records are not yet available on all Amazon Route 53 DNS
servers. When the NS and SOA records are available, the status of the zone changes to INSYNC.
createHostedZoneRequest - A complex type that contains information about the request to create a hosted zone.CallerReference.Public hosted zone: Two hosted zones that have the same name or that have a parent/child relationship (example.com and test.example.com) can't have any common name servers. You tried to create a hosted zone that has the same name as an existing hosted zone or that's the parent or child of an existing hosted zone, and you specified a delegation set that shares one or more name servers with the existing hosted zone.
Private hosted zone: You specified an Amazon VPC that you're already using for another hosted zone, and the domain that you specified for one of the hosted zones is a subdomain of the domain that you specified for the other hosted zone. For example, you can't use the same Amazon VPC for the hosted zones for example.com and test.example.com.
default CompletableFuture<CreateReusableDelegationSetResponse> createReusableDelegationSet(CreateReusableDelegationSetRequest createReusableDelegationSetRequest)
Creates a delegation set (a group of four name servers) that can be reused by multiple hosted zones. If a hosted
zoned ID is specified, CreateReusableDelegationSet marks the delegation set associated with that
zone as reusable
A reusable delegation set can't be associated with a private hosted zone.
For information on how to use a reusable delegation set to configure white label name servers, see Configuring White Label Name Servers.
createReusableDelegationSetRequest - default CompletableFuture<CreateTrafficPolicyResponse> createTrafficPolicy(CreateTrafficPolicyRequest createTrafficPolicyRequest)
Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com).
createTrafficPolicyRequest - A complex type that contains information about the traffic policy that you want to create.Name
already exists.Document element is invalid.default CompletableFuture<CreateTrafficPolicyInstanceResponse> createTrafficPolicyInstance(CreateTrafficPolicyInstanceRequest createTrafficPolicyInstanceRequest)
Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy
version. In addition, CreateTrafficPolicyInstance associates the resource record sets with a
specified domain name (such as example.com) or subdomain name (such as www.example.com). Amazon Route 53 responds
to DNS queries for the domain or subdomain name by using the resource record sets that
CreateTrafficPolicyInstance created.
createTrafficPolicyInstanceRequest - A complex type that contains information about the resource record sets that you want to create based on a
specified traffic policy.default CompletableFuture<CreateTrafficPolicyVersionResponse> createTrafficPolicyVersion(CreateTrafficPolicyVersionRequest createTrafficPolicyVersionRequest)
Creates a new version of an existing traffic policy. When you create a new version of a traffic policy, you specify the ID of the traffic policy that you want to update and a JSON-formatted document that describes the new version. You use traffic policies to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com). You can create a maximum of 1000 versions of a traffic policy. If you reach the limit and need to create another version, you'll need to start a new traffic policy.
createTrafficPolicyVersionRequest - A complex type that contains information about the traffic policy that you want to create a new version
for.Document element is invalid.default CompletableFuture<CreateVPCAssociationAuthorizationResponse> createVPCAssociationAuthorization(CreateVPCAssociationAuthorizationRequest createVPCAssociationAuthorizationRequest)
Authorizes the AWS account that created a specified VPC to submit an AssociateVPCWithHostedZone
request to associate the VPC with a specified hosted zone that was created by a different account. To submit a
CreateVPCAssociationAuthorization request, you must use the account that created the hosted zone.
After you authorize the association, use the account that created the VPC to submit an
AssociateVPCWithHostedZone request.
If you want to associate multiple VPCs that you created by using one account with a hosted zone that you created by using a different account, you must submit one authorization request for each VPC.
createVPCAssociationAuthorizationRequest - A complex type that contains information about the request to authorize associating a VPC with your
private hosted zone. Authorization is only required when a private hosted zone and a VPC were created by
using different accounts.DeleteVPCAssociationAuthorization request to remove an existing
authorization. To get a list of existing authorizations, submit a
ListVPCAssociationAuthorizations request.default CompletableFuture<DeleteHealthCheckResponse> deleteHealthCheck(DeleteHealthCheckRequest deleteHealthCheckRequest)
Deletes a health check.
Amazon Route 53 does not prevent you from deleting a health check even if the health check is associated with one or more resource record sets. If you delete a health check and you don't update the associated resource record sets, the future status of the health check can't be predicted and may change. This will affect the routing of DNS queries for your DNS failover configuration. For more information, see Replacing and Deleting Health Checks in the Amazon Route 53 Developer Guide.
deleteHealthCheckRequest - This action deletes a health check.DeleteHealthCheck request.default CompletableFuture<DeleteHostedZoneResponse> deleteHostedZone(DeleteHostedZoneRequest deleteHostedZoneRequest)
Deletes a hosted zone.
If the name servers for the hosted zone are associated with a domain and if you want to make the domain
unavailable on the Internet, we recommend that you delete the name servers from the domain to prevent future DNS
queries from possibly being misrouted. If the domain is registered with Amazon Route 53, see
UpdateDomainNameservers. If the domain is registered with another registrar, use the method provided
by the registrar to delete name servers for the domain.
Some domain registries don't allow you to remove all of the name servers for a domain. If the registry for your domain requires one or more name servers, we recommend that you delete the hosted zone only if you transfer DNS service to another service provider, and you replace the name servers for the domain with name servers from the new provider.
You can delete a hosted zone only if it contains only the default SOA record and NS resource record sets. If the
hosted zone contains other resource record sets, you must delete them before you can delete the hosted zone. If
you try to delete a hosted zone that contains other resource record sets, the request fails, and Amazon Route 53
returns a HostedZoneNotEmpty error. For information about deleting records from your hosted zone,
see ChangeResourceRecordSets.
To verify that the hosted zone has been deleted, do one of the following:
Use the GetHostedZone action to request information about the hosted zone.
Use the ListHostedZones action to get a list of the hosted zones associated with the current AWS
account.
deleteHostedZoneRequest - A request to delete a hosted zone.HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
for the same request, we recommend that you wait, in intervals of increasing duration, before you try the
request again.default CompletableFuture<DeleteReusableDelegationSetResponse> deleteReusableDelegationSet(DeleteReusableDelegationSetRequest deleteReusableDelegationSetRequest)
Deletes a reusable delegation set.
You can delete a reusable delegation set only if it isn't associated with any hosted zones.
To verify that the reusable delegation set is not associated with any hosted zones, submit a GetReusableDelegationSet request and specify the ID of the reusable delegation set that you want to delete.
deleteReusableDelegationSetRequest - A request to delete a reusable delegation set.default CompletableFuture<DeleteTrafficPolicyResponse> deleteTrafficPolicy(DeleteTrafficPolicyRequest deleteTrafficPolicyRequest)
Deletes a traffic policy.
deleteTrafficPolicyRequest - A request to delete a specified traffic policy version.default CompletableFuture<DeleteTrafficPolicyInstanceResponse> deleteTrafficPolicyInstance(DeleteTrafficPolicyInstanceRequest deleteTrafficPolicyInstanceRequest)
Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you created the instance.
In the Amazon Route 53 console, traffic policy instances are known as policy records.
deleteTrafficPolicyInstanceRequest - A request to delete a specified traffic policy instance.HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
for the same request, we recommend that you wait, in intervals of increasing duration, before you try the
request again.default CompletableFuture<DeleteVPCAssociationAuthorizationResponse> deleteVPCAssociationAuthorization(DeleteVPCAssociationAuthorizationRequest deleteVPCAssociationAuthorizationRequest)
Removes authorization to submit an AssociateVPCWithHostedZone request to associate a specified VPC
with a hosted zone that was created by a different account. You must use the account that created the hosted zone
to submit a DeleteVPCAssociationAuthorization request.
Sending this request only prevents the AWS account that created the VPC from associating the VPC with the Amazon
Route 53 hosted zone in the future. If the VPC is already associated with the hosted zone,
DeleteVPCAssociationAuthorization won't disassociate the VPC from the hosted zone. If you want to
delete an existing association, use DisassociateVPCFromHostedZone.
deleteVPCAssociationAuthorizationRequest - A complex type that contains information about the request to remove authorization to associate a VPC that
was created by one AWS account with a hosted zone that was created with a different AWS account.default CompletableFuture<DisassociateVPCFromHostedZoneResponse> disassociateVPCFromHostedZone(DisassociateVPCFromHostedZoneRequest disassociateVPCFromHostedZoneRequest)
Disassociates a VPC from a Amazon Route 53 private hosted zone.
You can't disassociate the last VPC from a private hosted zone.
You can't disassociate a VPC from a private hosted zone when only one VPC is associated with the hosted zone. You also can't convert a private hosted zone into a public hosted zone.
disassociateVPCFromHostedZoneRequest - A complex type that contains information about the VPC that you want to disassociate from a specified
private hosted zone.default CompletableFuture<GetChangeResponse> getChange(GetChangeRequest getChangeRequest)
Returns the current status of a change batch request. The status is one of the following values:
PENDING indicates that the changes in this request have not propagated to all Amazon Route 53 DNS
servers. This is the initial status of all change batch requests.
INSYNC indicates that the changes have propagated to all Amazon Route 53 DNS servers.
getChangeRequest - The input for a GetChange request.default CompletableFuture<GetCheckerIpRangesResponse> getCheckerIpRanges(GetCheckerIpRangesRequest getCheckerIpRangesRequest)
GetCheckerIpRanges still works, but we recommend that you download ip-ranges.json, which includes IP
address ranges for all AWS services. For more information, see IP Address Ranges of
Amazon Route 53 Servers in the Amazon Route 53 Developer Guide.
getCheckerIpRangesRequest - default CompletableFuture<GetGeoLocationResponse> getGeoLocation(GetGeoLocationRequest getGeoLocationRequest)
Gets information about whether a specified geographic location is supported for Amazon Route 53 geolocation resource record sets.
Use the following syntax to determine whether a continent is supported for geolocation:
GET /2013-04-01/geolocation?ContinentCode=two-letter abbreviation for a continent
Use the following syntax to determine whether a country is supported for geolocation:
GET /2013-04-01/geolocation?CountryCode=two-character country code
Use the following syntax to determine whether a subdivision of a country is supported for geolocation:
GET /2013-04-01/geolocation?CountryCode=two-character country code&SubdivisionCode=subdivision code
getGeoLocationRequest - A request for information about whether a specified geographic location is supported for Amazon Route 53
geolocation resource record sets.default CompletableFuture<GetHealthCheckResponse> getHealthCheck(GetHealthCheckRequest getHealthCheckRequest)
Gets information about a specified health check.
getHealthCheckRequest - A request to get information about a specified health check.DeleteHealthCheck request.default CompletableFuture<GetHealthCheckCountResponse> getHealthCheckCount(GetHealthCheckCountRequest getHealthCheckCountRequest)
Retrieves the number of health checks that are associated with the current AWS account.
getHealthCheckCountRequest - A request for the number of health checks that are associated with the current AWS account.default CompletableFuture<GetHealthCheckLastFailureReasonResponse> getHealthCheckLastFailureReason(GetHealthCheckLastFailureReasonRequest getHealthCheckLastFailureReasonRequest)
Gets the reason that a specified health check failed most recently.
getHealthCheckLastFailureReasonRequest - A request for the reason that a health check failed most recently.DeleteHealthCheck request.default CompletableFuture<GetHealthCheckStatusResponse> getHealthCheckStatus(GetHealthCheckStatusRequest getHealthCheckStatusRequest)
Gets status of a specified health check.
getHealthCheckStatusRequest - A request to get the status for a health check.DeleteHealthCheck request.default CompletableFuture<GetHostedZoneResponse> getHostedZone(GetHostedZoneRequest getHostedZoneRequest)
Gets information about a specified hosted zone including the four name servers assigned to the hosted zone.
getHostedZoneRequest - A request to get information about a specified hosted zone.default CompletableFuture<GetHostedZoneCountResponse> getHostedZoneCount(GetHostedZoneCountRequest getHostedZoneCountRequest)
Retrieves the number of hosted zones that are associated with the current AWS account.
getHostedZoneCountRequest - A request to retrieve a count of all the hosted zones that are associated with the current AWS account.default CompletableFuture<GetReusableDelegationSetResponse> getReusableDelegationSet(GetReusableDelegationSetRequest getReusableDelegationSetRequest)
Retrieves information about a specified reusable delegation set, including the four name servers that are assigned to the delegation set.
getReusableDelegationSetRequest - A request to get information about a specified reusable delegation set.default CompletableFuture<GetTrafficPolicyResponse> getTrafficPolicy(GetTrafficPolicyRequest getTrafficPolicyRequest)
Gets information about a specific traffic policy version.
getTrafficPolicyRequest - Gets information about a specific traffic policy version.default CompletableFuture<GetTrafficPolicyInstanceResponse> getTrafficPolicyInstance(GetTrafficPolicyInstanceRequest getTrafficPolicyInstanceRequest)
Gets information about a specified traffic policy instance.
After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance
request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the
traffic policy definition. For more information, see the State response element.
In the Amazon Route 53 console, traffic policy instances are known as policy records.
getTrafficPolicyInstanceRequest - Gets information about a specified traffic policy instance.default CompletableFuture<GetTrafficPolicyInstanceCountResponse> getTrafficPolicyInstanceCount(GetTrafficPolicyInstanceCountRequest getTrafficPolicyInstanceCountRequest)
Gets the number of traffic policy instances that are associated with the current AWS account.
getTrafficPolicyInstanceCountRequest - Request to get the number of traffic policy instances that are associated with the current AWS account.default CompletableFuture<ListGeoLocationsResponse> listGeoLocations(ListGeoLocationsRequest listGeoLocationsRequest)
Retrieves a list of supported geo locations.
Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order immediately after the corresponding country.
listGeoLocationsRequest - A request to get a list of geographic locations that Amazon Route 53 supports for geolocation resource
record sets.default CompletableFuture<ListHealthChecksResponse> listHealthChecks(ListHealthChecksRequest listHealthChecksRequest)
Retrieve a list of the health checks that are associated with the current AWS account.
listHealthChecksRequest - A request to retrieve a list of the health checks that are associated with the current AWS account.default CompletableFuture<ListHostedZonesResponse> listHostedZones(ListHostedZonesRequest listHostedZonesRequest)
Retrieves a list of the public and private hosted zones that are associated with the current AWS account. The
response includes a HostedZones child element for each hosted zone.
Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use
the maxitems parameter to list them in groups of up to 100.
listHostedZonesRequest - A request to retrieve a list of the public and private hosted zones that are associated with the current
AWS account.default CompletableFuture<ListHostedZonesByNameResponse> listHostedZonesByName(ListHostedZonesByNameRequest listHostedZonesByNameRequest)
Retrieves a list of your hosted zones in lexicographic order. The response includes a HostedZones
child element for each hosted zone created by the current AWS account.
ListHostedZonesByName sorts hosted zones by name with the labels reversed. For example:
com.example.www.
Note the trailing dot, which can change the sort order in some circumstances.
If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the
domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database.
For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name.
ListHostedZonesByName alphabetizes it as:
com.ex\344mple.
The labels are reversed and alphabetized using the escaped value. For more information about valid domain name formats, including internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.
Amazon Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the
MaxItems parameter to list them in groups of up to 100. The response includes values that help
navigate from one group of MaxItems hosted zones to the next:
The DNSName and HostedZoneId elements in the response contain the values, if any,
specified for the dnsname and hostedzoneid parameters in the request that produced the
current response.
The MaxItems element in the response contains the value, if any, that you specified for the
maxitems parameter in the request that produced the current response.
If the value of IsTruncated in the response is true, there are more hosted zones associated with the
current AWS account.
If IsTruncated is false, this response includes the last hosted zone that is associated with the
current account. The NextDNSName element and NextHostedZoneId elements are omitted from
the response.
The NextDNSName and NextHostedZoneId elements in the response contain the domain name
and the hosted zone ID of the next hosted zone that is associated with the current AWS account. If you want to
list more hosted zones, make another call to ListHostedZonesByName, and specify the value of
NextDNSName and NextHostedZoneId in the dnsname and
hostedzoneid parameters, respectively.
listHostedZonesByNameRequest - Retrieves a list of the public and private hosted zones that are associated with the current AWS account
in ASCII order by domain name.default CompletableFuture<ListResourceRecordSetsResponse> listResourceRecordSets(ListResourceRecordSetsRequest listResourceRecordSetsRequest)
Lists the resource record sets in a specified hosted zone.
ListResourceRecordSets returns up to 100 resource record sets at a time in ASCII order, beginning at
a position specified by the name and type elements. The action sorts results first by
DNS name with the labels reversed, for example:
com.example.www.
Note the trailing dot, which can change the sort order in some circumstances.
When multiple records have the same DNS name, the action sorts results by the record type.
You can use the name and type elements to adjust the beginning position of the list of resource record sets returned:
The results begin with the first resource record set that the hosted zone contains.
The results begin with the first resource record set in the list whose name is greater than or equal to
Name.
Amazon Route 53 returns the InvalidInput error.
The results begin with the first resource record set in the list whose name is greater than or equal to
Name, and whose type is greater than or equal to Type.
This action returns the most current version of the records. This includes records that are PENDING,
and that are not yet available on all Amazon Route 53 DNS servers.
To ensure that you get an accurate listing of the resource record sets for a hosted zone at a point in time, do
not submit a ChangeResourceRecordSets request while you're paging through the results of a
ListResourceRecordSets request. If you do, some pages may display results without the latest changes
while other pages display results with the latest changes.
listResourceRecordSetsRequest - A request for the resource record sets that are associated with a specified hosted zone.default CompletableFuture<ListReusableDelegationSetsResponse> listReusableDelegationSets(ListReusableDelegationSetsRequest listReusableDelegationSetsRequest)
Retrieves a list of the reusable delegation sets that are associated with the current AWS account.
listReusableDelegationSetsRequest - A request to get a list of the reusable delegation sets that are associated with the current AWS account.default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
Lists tags for one health check or hosted zone.
For information about using tags for cost allocation, see Using Cost Allocation Tags in the AWS Billing and Cost Management User Guide.
listTagsForResourceRequest - A complex type containing information about a request for a list of the tags that are associated with an
individual resource.DeleteHealthCheck request.HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
for the same request, we recommend that you wait, in intervals of increasing duration, before you try the
request again.default CompletableFuture<ListTagsForResourcesResponse> listTagsForResources(ListTagsForResourcesRequest listTagsForResourcesRequest)
Lists tags for up to 10 health checks or hosted zones.
For information about using tags for cost allocation, see Using Cost Allocation Tags in the AWS Billing and Cost Management User Guide.
listTagsForResourcesRequest - A complex type that contains information about the health checks or hosted zones for which you want to
list tags.DeleteHealthCheck request.HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
for the same request, we recommend that you wait, in intervals of increasing duration, before you try the
request again.default CompletableFuture<ListTrafficPoliciesResponse> listTrafficPolicies(ListTrafficPoliciesRequest listTrafficPoliciesRequest)
Gets information about the latest version for every traffic policy that is associated with the current AWS account. Policies are listed in the order in which they were created.
listTrafficPoliciesRequest - A complex type that contains the information about the request to list the traffic policies that are
associated with the current AWS account.default CompletableFuture<ListTrafficPolicyInstancesResponse> listTrafficPolicyInstances(ListTrafficPolicyInstancesRequest listTrafficPolicyInstancesRequest)
Gets information about the traffic policy instances that you created by using the current AWS account.
After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53
creates the resource record sets that are specified in the traffic policy definition. For more information, see
the State response element.
Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances,
you can use the MaxItems parameter to list them in groups of up to 100.
listTrafficPolicyInstancesRequest - A request to get information about the traffic policy instances that you created by using the current AWS
account.default CompletableFuture<ListTrafficPolicyInstancesByHostedZoneResponse> listTrafficPolicyInstancesByHostedZone(ListTrafficPolicyInstancesByHostedZoneRequest listTrafficPolicyInstancesByHostedZoneRequest)
Gets information about the traffic policy instances that you created in a specified hosted zone.
After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance
request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the
traffic policy definition. For more information, see the State response element.
Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances,
you can use the MaxItems parameter to list them in groups of up to 100.
listTrafficPolicyInstancesByHostedZoneRequest - A request for the traffic policy instances that you created in a specified hosted zone.default CompletableFuture<ListTrafficPolicyInstancesByPolicyResponse> listTrafficPolicyInstancesByPolicy(ListTrafficPolicyInstancesByPolicyRequest listTrafficPolicyInstancesByPolicyRequest)
Gets information about the traffic policy instances that you created by using a specify traffic policy version.
After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance
request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the
traffic policy definition. For more information, see the State response element.
Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances,
you can use the MaxItems parameter to list them in groups of up to 100.
listTrafficPolicyInstancesByPolicyRequest - A complex type that contains the information about the request to list your traffic policy instances.default CompletableFuture<ListTrafficPolicyVersionsResponse> listTrafficPolicyVersions(ListTrafficPolicyVersionsRequest listTrafficPolicyVersionsRequest)
Gets information about all of the versions for a specified traffic policy.
Traffic policy versions are listed in numerical order by VersionNumber.
listTrafficPolicyVersionsRequest - A complex type that contains the information about the request to list your traffic policies.default CompletableFuture<ListVPCAssociationAuthorizationsResponse> listVPCAssociationAuthorizations(ListVPCAssociationAuthorizationsRequest listVPCAssociationAuthorizationsRequest)
Gets a list of the VPCs that were created by other accounts and that can be associated with a specified hosted
zone because you've submitted one or more CreateVPCAssociationAuthorization requests.
The response includes a VPCs element with a VPC child element for each VPC that can be
associated with the hosted zone.
listVPCAssociationAuthorizationsRequest - A complex type that contains information about that can be associated with your hosted zone.default CompletableFuture<TestDNSAnswerResponse> testDNSAnswer(TestDNSAnswerRequest testDNSAnswerRequest)
Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask.
testDNSAnswerRequest - Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and
type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and
a subnet mask.default CompletableFuture<UpdateHealthCheckResponse> updateHealthCheck(UpdateHealthCheckRequest updateHealthCheckRequest)
Updates an existing health check. Note that some values can't be updated.
For more information about updating health checks, see Creating, Updating, and Deleting Health Checks in the Amazon Route 53 Developer Guide.
updateHealthCheckRequest - A complex type that contains information about a request to update a health check.DeleteHealthCheck request.HealthCheckVersion in the request
doesn't match the value of HealthCheckVersion in the health check.default CompletableFuture<UpdateHostedZoneCommentResponse> updateHostedZoneComment(UpdateHostedZoneCommentRequest updateHostedZoneCommentRequest)
Updates the comment for a specified hosted zone.
updateHostedZoneCommentRequest - A request to update the comment for a hosted zone.default CompletableFuture<UpdateTrafficPolicyCommentResponse> updateTrafficPolicyComment(UpdateTrafficPolicyCommentRequest updateTrafficPolicyCommentRequest)
Updates the comment for a specified traffic policy version.
updateTrafficPolicyCommentRequest - A complex type that contains information about the traffic policy that you want to update the comment for.default CompletableFuture<UpdateTrafficPolicyInstanceResponse> updateTrafficPolicyInstance(UpdateTrafficPolicyInstanceRequest updateTrafficPolicyInstanceRequest)
Updates the resource record sets in a specified hosted zone that were created based on the settings in a specified traffic policy version.
When you update a traffic policy instance, Amazon Route 53 continues to respond to DNS queries for the root resource record set name (such as example.com) while it replaces one group of resource record sets with another. Amazon Route 53 performs the following operations:
Amazon Route 53 creates a new group of resource record sets based on the specified traffic policy. This is true regardless of how significant the differences are between the existing resource record sets and the new resource record sets.
When all of the new resource record sets have been created, Amazon Route 53 starts to respond to DNS queries for the root resource record set name (such as example.com) by using the new resource record sets.
Amazon Route 53 deletes the old group of resource record sets that are associated with the root resource record set name.
updateTrafficPolicyInstanceRequest - A complex type that contains information about the resource record sets that you want to update based on a
specified traffic policy instance.HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
for the same request, we recommend that you wait, in intervals of increasing duration, before you try the
request again.CreateTrafficPolicy or CreateTrafficPolicyVersion
request.Copyright © 2017 Amazon Web Services, Inc. All Rights Reserved.