public static interface AdminCreateUserRequest.Builder extends CognitoIdentityProviderRequest.Builder, CopyableBuilder<AdminCreateUserRequest.Builder,AdminCreateUserRequest>
Modifier and Type | Method and Description |
---|---|
AdminCreateUserRequest.Builder |
desiredDeliveryMediums(Collection<String> desiredDeliveryMediums)
Specify
"EMAIL" if email will be used to send the welcome message. |
AdminCreateUserRequest.Builder |
desiredDeliveryMediums(String... desiredDeliveryMediums)
Specify
"EMAIL" if email will be used to send the welcome message. |
AdminCreateUserRequest.Builder |
forceAliasCreation(Boolean forceAliasCreation)
This parameter is only used if the
phone_number_verified or email_verified
attribute is set to True . |
AdminCreateUserRequest.Builder |
messageAction(MessageActionType messageAction)
Set to
"RESEND" to resend the invitation message to a user that already exists and reset the
expiration limit on the user's account. |
AdminCreateUserRequest.Builder |
messageAction(String messageAction)
Set to
"RESEND" to resend the invitation message to a user that already exists and reset the
expiration limit on the user's account. |
AdminCreateUserRequest.Builder |
requestOverrideConfig(AwsRequestOverrideConfig awsRequestOverrideConfig)
Add an optional request override configuration.
|
AdminCreateUserRequest.Builder |
temporaryPassword(String temporaryPassword)
The user's temporary password.
|
AdminCreateUserRequest.Builder |
userAttributes(AttributeType... userAttributes)
An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
created.
|
AdminCreateUserRequest.Builder |
userAttributes(Collection<AttributeType> userAttributes)
An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
created.
|
AdminCreateUserRequest.Builder |
username(String username)
The username for the user.
|
AdminCreateUserRequest.Builder |
userPoolId(String userPoolId)
The user pool ID for the user pool where the user will be created.
|
AdminCreateUserRequest.Builder |
validationData(AttributeType... validationData)
The user's validation data.
|
AdminCreateUserRequest.Builder |
validationData(Collection<AttributeType> validationData)
The user's validation data.
|
build
requestOverrideConfig, requestOverrideConfig
copy
apply, build
AdminCreateUserRequest.Builder userPoolId(String userPoolId)
The user pool ID for the user pool where the user will be created.
userPoolId
- The user pool ID for the user pool where the user will be created.AdminCreateUserRequest.Builder username(String username)
The username for the user. Must be unique within the user pool. Must be a UTF-8 string between 1 and 128 characters. After the user is created, the username cannot be changed.
username
- The username for the user. Must be unique within the user pool. Must be a UTF-8 string between 1 and
128 characters. After the user is created, the username cannot be changed.AdminCreateUserRequest.Builder userAttributes(Collection<AttributeType> userAttributes)
An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
created. You can create a user without specifying any attributes other than Username
. However,
any attributes that you specify as required (in CreateUserPool or in
the Attributes tab of the console) must be supplied either by you (in your call to
AdminCreateUser
) or by the user (when he or she signs up in response to your welcome message).
For custom attributes, you must prepend the custom:
prefix to the attribute name.
To send a message inviting the user to sign up, you must specify the user's email address or phone number. This can be done in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.
In your call to AdminCreateUser
, you can set the email_verified
attribute to
True
, and you can set the phone_number_verified
attribute to True
.
(You can also do this by calling AdminUpdateUserAttributes.)
email: The email address of the user to whom the message that contains the code and username will be
sent. Required if the email_verified
attribute is set to True
, or if
"EMAIL"
is specified in the DesiredDeliveryMediums
parameter.
phone_number: The phone number of the user to whom the message that contains the code and username
will be sent. Required if the phone_number_verified
attribute is set to True
, or if
"SMS"
is specified in the DesiredDeliveryMediums
parameter.
userAttributes
- An array of name-value pairs that contain user attributes and attribute values to be set for the user
to be created. You can create a user without specifying any attributes other than
Username
. However, any attributes that you specify as required (in CreateUserPool or in the Attributes tab of the console) must
be supplied either by you (in your call to AdminCreateUser
) or by the user (when he or
she signs up in response to your welcome message).
For custom attributes, you must prepend the custom:
prefix to the attribute name.
To send a message inviting the user to sign up, you must specify the user's email address or phone number. This can be done in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.
In your call to AdminCreateUser
, you can set the email_verified
attribute to
True
, and you can set the phone_number_verified
attribute to
True
. (You can also do this by calling AdminUpdateUserAttributes.)
email: The email address of the user to whom the message that contains the code and username
will be sent. Required if the email_verified
attribute is set to True
, or if
"EMAIL"
is specified in the DesiredDeliveryMediums
parameter.
phone_number: The phone number of the user to whom the message that contains the code and
username will be sent. Required if the phone_number_verified
attribute is set to
True
, or if "SMS"
is specified in the DesiredDeliveryMediums
parameter.
AdminCreateUserRequest.Builder userAttributes(AttributeType... userAttributes)
An array of name-value pairs that contain user attributes and attribute values to be set for the user to be
created. You can create a user without specifying any attributes other than Username
. However,
any attributes that you specify as required (in CreateUserPool or in
the Attributes tab of the console) must be supplied either by you (in your call to
AdminCreateUser
) or by the user (when he or she signs up in response to your welcome message).
For custom attributes, you must prepend the custom:
prefix to the attribute name.
To send a message inviting the user to sign up, you must specify the user's email address or phone number. This can be done in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.
In your call to AdminCreateUser
, you can set the email_verified
attribute to
True
, and you can set the phone_number_verified
attribute to True
.
(You can also do this by calling AdminUpdateUserAttributes.)
email: The email address of the user to whom the message that contains the code and username will be
sent. Required if the email_verified
attribute is set to True
, or if
"EMAIL"
is specified in the DesiredDeliveryMediums
parameter.
phone_number: The phone number of the user to whom the message that contains the code and username
will be sent. Required if the phone_number_verified
attribute is set to True
, or if
"SMS"
is specified in the DesiredDeliveryMediums
parameter.
userAttributes
- An array of name-value pairs that contain user attributes and attribute values to be set for the user
to be created. You can create a user without specifying any attributes other than
Username
. However, any attributes that you specify as required (in CreateUserPool or in the Attributes tab of the console) must
be supplied either by you (in your call to AdminCreateUser
) or by the user (when he or
she signs up in response to your welcome message).
For custom attributes, you must prepend the custom:
prefix to the attribute name.
To send a message inviting the user to sign up, you must specify the user's email address or phone number. This can be done in your call to AdminCreateUser or in the Users tab of the Amazon Cognito console for managing your user pools.
In your call to AdminCreateUser
, you can set the email_verified
attribute to
True
, and you can set the phone_number_verified
attribute to
True
. (You can also do this by calling AdminUpdateUserAttributes.)
email: The email address of the user to whom the message that contains the code and username
will be sent. Required if the email_verified
attribute is set to True
, or if
"EMAIL"
is specified in the DesiredDeliveryMediums
parameter.
phone_number: The phone number of the user to whom the message that contains the code and
username will be sent. Required if the phone_number_verified
attribute is set to
True
, or if "SMS"
is specified in the DesiredDeliveryMediums
parameter.
AdminCreateUserRequest.Builder validationData(Collection<AttributeType> validationData)
The user's validation data. This is an array of name-value pairs that contain user attributes and attribute values that you can use for custom validation, such as restricting the types of user accounts that can be registered. For example, you might choose to allow or disallow user sign-up based on the user's domain.
To configure custom validation, you must create a Pre Sign-up Lambda trigger for the user pool as described in the Amazon Cognito Developer Guide. The Lambda trigger receives the validation data and uses it in the validation process.
The user's validation data is not persisted.
validationData
- The user's validation data. This is an array of name-value pairs that contain user attributes and
attribute values that you can use for custom validation, such as restricting the types of user
accounts that can be registered. For example, you might choose to allow or disallow user sign-up based
on the user's domain.
To configure custom validation, you must create a Pre Sign-up Lambda trigger for the user pool as described in the Amazon Cognito Developer Guide. The Lambda trigger receives the validation data and uses it in the validation process.
The user's validation data is not persisted.
AdminCreateUserRequest.Builder validationData(AttributeType... validationData)
The user's validation data. This is an array of name-value pairs that contain user attributes and attribute values that you can use for custom validation, such as restricting the types of user accounts that can be registered. For example, you might choose to allow or disallow user sign-up based on the user's domain.
To configure custom validation, you must create a Pre Sign-up Lambda trigger for the user pool as described in the Amazon Cognito Developer Guide. The Lambda trigger receives the validation data and uses it in the validation process.
The user's validation data is not persisted.
validationData
- The user's validation data. This is an array of name-value pairs that contain user attributes and
attribute values that you can use for custom validation, such as restricting the types of user
accounts that can be registered. For example, you might choose to allow or disallow user sign-up based
on the user's domain.
To configure custom validation, you must create a Pre Sign-up Lambda trigger for the user pool as described in the Amazon Cognito Developer Guide. The Lambda trigger receives the validation data and uses it in the validation process.
The user's validation data is not persisted.
AdminCreateUserRequest.Builder temporaryPassword(String temporaryPassword)
The user's temporary password. This password must conform to the password policy that you specified when you created the user pool.
The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the temporary password in the sign-in page along with a new password to be used in all future sign-ins.
This parameter is not required. If you do not specify a value, Amazon Cognito generates one for you.
The temporary password can only be used until the user account expiration limit that you specified when you
created the user pool. To reset the account after that time limit, you must call AdminCreateUser
again, specifying "RESEND"
for the MessageAction
parameter.
temporaryPassword
- The user's temporary password. This password must conform to the password policy that you specified
when you created the user pool.
The temporary password is valid only once. To complete the Admin Create User flow, the user must enter the temporary password in the sign-in page along with a new password to be used in all future sign-ins.
This parameter is not required. If you do not specify a value, Amazon Cognito generates one for you.
The temporary password can only be used until the user account expiration limit that you specified
when you created the user pool. To reset the account after that time limit, you must call
AdminCreateUser
again, specifying "RESEND"
for the
MessageAction
parameter.
AdminCreateUserRequest.Builder forceAliasCreation(Boolean forceAliasCreation)
This parameter is only used if the phone_number_verified
or email_verified
attribute is set to True
. Otherwise, it is ignored.
If this parameter is set to True
and the phone number or email address specified in the
UserAttributes parameter already exists as an alias with a different user, the API call will migrate the
alias from the previous user to the newly created user. The previous user will no longer be able to log in
using that alias.
If this parameter is set to False
, the API throws an AliasExistsException
error if
the alias already exists. The default value is False
.
forceAliasCreation
- This parameter is only used if the phone_number_verified
or email_verified
attribute is set to True
. Otherwise, it is ignored.
If this parameter is set to True
and the phone number or email address specified in the
UserAttributes parameter already exists as an alias with a different user, the API call will migrate
the alias from the previous user to the newly created user. The previous user will no longer be able
to log in using that alias.
If this parameter is set to False
, the API throws an AliasExistsException
error if the alias already exists. The default value is False
.
AdminCreateUserRequest.Builder messageAction(String messageAction)
Set to "RESEND"
to resend the invitation message to a user that already exists and reset the
expiration limit on the user's account. Set to "SUPPRESS"
to suppress sending the message. Only
one value can be specified.
messageAction
- Set to "RESEND"
to resend the invitation message to a user that already exists and reset
the expiration limit on the user's account. Set to "SUPPRESS"
to suppress sending the
message. Only one value can be specified.MessageActionType
,
MessageActionType
AdminCreateUserRequest.Builder messageAction(MessageActionType messageAction)
Set to "RESEND"
to resend the invitation message to a user that already exists and reset the
expiration limit on the user's account. Set to "SUPPRESS"
to suppress sending the message. Only
one value can be specified.
messageAction
- Set to "RESEND"
to resend the invitation message to a user that already exists and reset
the expiration limit on the user's account. Set to "SUPPRESS"
to suppress sending the
message. Only one value can be specified.MessageActionType
,
MessageActionType
AdminCreateUserRequest.Builder desiredDeliveryMediums(Collection<String> desiredDeliveryMediums)
Specify "EMAIL"
if email will be used to send the welcome message. Specify "SMS"
if
the phone number will be used. The default value is "SMS"
. More than one value can be specified.
desiredDeliveryMediums
- Specify "EMAIL"
if email will be used to send the welcome message. Specify
"SMS"
if the phone number will be used. The default value is "SMS"
. More
than one value can be specified.AdminCreateUserRequest.Builder desiredDeliveryMediums(String... desiredDeliveryMediums)
Specify "EMAIL"
if email will be used to send the welcome message. Specify "SMS"
if
the phone number will be used. The default value is "SMS"
. More than one value can be specified.
desiredDeliveryMediums
- Specify "EMAIL"
if email will be used to send the welcome message. Specify
"SMS"
if the phone number will be used. The default value is "SMS"
. More
than one value can be specified.AdminCreateUserRequest.Builder requestOverrideConfig(AwsRequestOverrideConfig awsRequestOverrideConfig)
AwsRequest.Builder
requestOverrideConfig
in interface AwsRequest.Builder
awsRequestOverrideConfig
- The override configuration.Copyright © 2017 Amazon Web Services, Inc. All Rights Reserved.