public static interface ModifyCacheClusterRequest.Builder extends ElastiCacheRequest.Builder, CopyableBuilder<ModifyCacheClusterRequest.Builder,ModifyCacheClusterRequest>
Modifier and Type | Method and Description |
---|---|
ModifyCacheClusterRequest.Builder |
applyImmediately(Boolean applyImmediately)
If
true , this parameter causes the modifications in this request and any pending modifications
to be applied, asynchronously and as soon as possible, regardless of the
PreferredMaintenanceWindow setting for the cluster. |
ModifyCacheClusterRequest.Builder |
autoMinorVersionUpgrade(Boolean autoMinorVersionUpgrade)
This parameter is currently disabled.
|
ModifyCacheClusterRequest.Builder |
azMode(AZMode azMode)
Specifies whether the new nodes in this Memcached cluster are all created in a single Availability Zone or
created across multiple Availability Zones.
|
ModifyCacheClusterRequest.Builder |
azMode(String azMode)
Specifies whether the new nodes in this Memcached cluster are all created in a single Availability Zone or
created across multiple Availability Zones.
|
ModifyCacheClusterRequest.Builder |
cacheClusterId(String cacheClusterId)
The cluster identifier.
|
ModifyCacheClusterRequest.Builder |
cacheNodeIdsToRemove(Collection<String> cacheNodeIdsToRemove)
A list of cache node IDs to be removed.
|
ModifyCacheClusterRequest.Builder |
cacheNodeIdsToRemove(String... cacheNodeIdsToRemove)
A list of cache node IDs to be removed.
|
ModifyCacheClusterRequest.Builder |
cacheNodeType(String cacheNodeType)
A valid cache node type that you want to scale this cluster up to.
|
ModifyCacheClusterRequest.Builder |
cacheParameterGroupName(String cacheParameterGroupName)
The name of the cache parameter group to apply to this cluster.
|
ModifyCacheClusterRequest.Builder |
cacheSecurityGroupNames(Collection<String> cacheSecurityGroupNames)
A list of cache security group names to authorize on this cluster.
|
ModifyCacheClusterRequest.Builder |
cacheSecurityGroupNames(String... cacheSecurityGroupNames)
A list of cache security group names to authorize on this cluster.
|
ModifyCacheClusterRequest.Builder |
engineVersion(String engineVersion)
The upgraded version of the cache engine to be run on the cache nodes.
|
ModifyCacheClusterRequest.Builder |
newAvailabilityZones(Collection<String> newAvailabilityZones)
The list of Availability Zones where the new Memcached cache nodes are created.
|
ModifyCacheClusterRequest.Builder |
newAvailabilityZones(String... newAvailabilityZones)
The list of Availability Zones where the new Memcached cache nodes are created.
|
ModifyCacheClusterRequest.Builder |
notificationTopicArn(String notificationTopicArn)
The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications are sent.
|
ModifyCacheClusterRequest.Builder |
notificationTopicStatus(String notificationTopicStatus)
The status of the Amazon SNS notification topic.
|
ModifyCacheClusterRequest.Builder |
numCacheNodes(Integer numCacheNodes)
The number of cache nodes that the cluster should have.
|
ModifyCacheClusterRequest.Builder |
preferredMaintenanceWindow(String preferredMaintenanceWindow)
Specifies the weekly time range during which maintenance on the cluster is performed.
|
ModifyCacheClusterRequest.Builder |
requestOverrideConfig(AwsRequestOverrideConfig awsRequestOverrideConfig)
Add an optional request override configuration.
|
ModifyCacheClusterRequest.Builder |
securityGroupIds(Collection<String> securityGroupIds)
Specifies the VPC Security Groups associated with the cluster.
|
ModifyCacheClusterRequest.Builder |
securityGroupIds(String... securityGroupIds)
Specifies the VPC Security Groups associated with the cluster.
|
ModifyCacheClusterRequest.Builder |
snapshotRetentionLimit(Integer snapshotRetentionLimit)
The number of days for which ElastiCache retains automatic cluster snapshots before deleting them.
|
ModifyCacheClusterRequest.Builder |
snapshotWindow(String snapshotWindow)
The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your cluster.
|
build
requestOverrideConfig, requestOverrideConfig
copy
apply, build
ModifyCacheClusterRequest.Builder cacheClusterId(String cacheClusterId)
The cluster identifier. This value is stored as a lowercase string.
cacheClusterId
- The cluster identifier. This value is stored as a lowercase string.ModifyCacheClusterRequest.Builder numCacheNodes(Integer numCacheNodes)
The number of cache nodes that the cluster should have. If the value for NumCacheNodes
is
greater than the sum of the number of current cache nodes and the number of cache nodes pending creation
(which may be zero), more nodes are added. If the value is less than the number of existing cache nodes,
nodes are removed. If the value is equal to the number of current cache nodes, any pending add or remove
requests are canceled.
If you are removing cache nodes, you must use the CacheNodeIdsToRemove
parameter to provide the
IDs of the specific cache nodes to remove.
For clusters running Redis, this value must be 1. For clusters running Memcached, this value must be between 1 and 20.
Adding or removing Memcached cache nodes can be applied immediately or as a pending operation (see
ApplyImmediately
).
A pending operation to modify the number of cache nodes in a cluster during its maintenance window, whether
by adding or removing nodes in accordance with the scale out architecture, is not queued. The customer's
latest request to add or remove nodes to the cluster overrides any previous pending operations to modify the
number of cache nodes in the cluster. For example, a request to remove 2 nodes would override a previous
pending operation to remove 3 nodes. Similarly, a request to add 2 nodes would override a previous pending
operation to remove 3 nodes and vice versa. As Memcached cache nodes may now be provisioned in different
Availability Zones with flexible cache node placement, a request to add nodes does not automatically override
a previous pending operation to add nodes. The customer can modify the previous pending operation to add more
nodes or explicitly cancel the pending request and retry the new request. To cancel pending operations to
modify the number of cache nodes in a cluster, use the ModifyCacheCluster
request and set
NumCacheNodes
equal to the number of cache nodes currently in the cluster.
numCacheNodes
- The number of cache nodes that the cluster should have. If the value for NumCacheNodes
is
greater than the sum of the number of current cache nodes and the number of cache nodes pending
creation (which may be zero), more nodes are added. If the value is less than the number of existing
cache nodes, nodes are removed. If the value is equal to the number of current cache nodes, any
pending add or remove requests are canceled.
If you are removing cache nodes, you must use the CacheNodeIdsToRemove
parameter to
provide the IDs of the specific cache nodes to remove.
For clusters running Redis, this value must be 1. For clusters running Memcached, this value must be between 1 and 20.
Adding or removing Memcached cache nodes can be applied immediately or as a pending operation (see
ApplyImmediately
).
A pending operation to modify the number of cache nodes in a cluster during its maintenance window,
whether by adding or removing nodes in accordance with the scale out architecture, is not queued. The
customer's latest request to add or remove nodes to the cluster overrides any previous pending
operations to modify the number of cache nodes in the cluster. For example, a request to remove 2
nodes would override a previous pending operation to remove 3 nodes. Similarly, a request to add 2
nodes would override a previous pending operation to remove 3 nodes and vice versa. As Memcached cache
nodes may now be provisioned in different Availability Zones with flexible cache node placement, a
request to add nodes does not automatically override a previous pending operation to add nodes. The
customer can modify the previous pending operation to add more nodes or explicitly cancel the pending
request and retry the new request. To cancel pending operations to modify the number of cache nodes in
a cluster, use the ModifyCacheCluster
request and set NumCacheNodes
equal to
the number of cache nodes currently in the cluster.
ModifyCacheClusterRequest.Builder cacheNodeIdsToRemove(Collection<String> cacheNodeIdsToRemove)
A list of cache node IDs to be removed. A node ID is a numeric identifier (0001, 0002, etc.). This parameter
is only valid when NumCacheNodes
is less than the existing number of cache nodes. The number of
cache node IDs supplied in this parameter must match the difference between the existing number of cache
nodes in the cluster or pending cache nodes, whichever is greater, and the value of
NumCacheNodes
in the request.
For example: If you have 3 active cache nodes, 7 pending cache nodes, and the number of cache nodes in this
ModifyCacheCluster
call is 5, you must list 2 (7 - 5) cache node IDs to remove.
cacheNodeIdsToRemove
- A list of cache node IDs to be removed. A node ID is a numeric identifier (0001, 0002, etc.). This
parameter is only valid when NumCacheNodes
is less than the existing number of cache
nodes. The number of cache node IDs supplied in this parameter must match the difference between the
existing number of cache nodes in the cluster or pending cache nodes, whichever is greater, and the
value of NumCacheNodes
in the request.
For example: If you have 3 active cache nodes, 7 pending cache nodes, and the number of cache nodes in
this ModifyCacheCluster
call is 5, you must list 2 (7 - 5) cache node IDs to remove.
ModifyCacheClusterRequest.Builder cacheNodeIdsToRemove(String... cacheNodeIdsToRemove)
A list of cache node IDs to be removed. A node ID is a numeric identifier (0001, 0002, etc.). This parameter
is only valid when NumCacheNodes
is less than the existing number of cache nodes. The number of
cache node IDs supplied in this parameter must match the difference between the existing number of cache
nodes in the cluster or pending cache nodes, whichever is greater, and the value of
NumCacheNodes
in the request.
For example: If you have 3 active cache nodes, 7 pending cache nodes, and the number of cache nodes in this
ModifyCacheCluster
call is 5, you must list 2 (7 - 5) cache node IDs to remove.
cacheNodeIdsToRemove
- A list of cache node IDs to be removed. A node ID is a numeric identifier (0001, 0002, etc.). This
parameter is only valid when NumCacheNodes
is less than the existing number of cache
nodes. The number of cache node IDs supplied in this parameter must match the difference between the
existing number of cache nodes in the cluster or pending cache nodes, whichever is greater, and the
value of NumCacheNodes
in the request.
For example: If you have 3 active cache nodes, 7 pending cache nodes, and the number of cache nodes in
this ModifyCacheCluster
call is 5, you must list 2 (7 - 5) cache node IDs to remove.
ModifyCacheClusterRequest.Builder azMode(String azMode)
Specifies whether the new nodes in this Memcached cluster are all created in a single Availability Zone or created across multiple Availability Zones.
Valid values: single-az
| cross-az
.
This option is only supported for Memcached clusters.
You cannot specify single-az
if the Memcached cluster already has cache nodes in different
Availability Zones. If cross-az
is specified, existing Memcached nodes remain in their current
Availability Zone.
Only newly created nodes are located in different Availability Zones. For instructions on how to move existing Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of Cache Node Considerations for Memcached.
azMode
- Specifies whether the new nodes in this Memcached cluster are all created in a single Availability
Zone or created across multiple Availability Zones.
Valid values: single-az
| cross-az
.
This option is only supported for Memcached clusters.
You cannot specify single-az
if the Memcached cluster already has cache nodes in
different Availability Zones. If cross-az
is specified, existing Memcached nodes remain
in their current Availability Zone.
Only newly created nodes are located in different Availability Zones. For instructions on how to move existing Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of Cache Node Considerations for Memcached.
AZMode
,
AZMode
ModifyCacheClusterRequest.Builder azMode(AZMode azMode)
Specifies whether the new nodes in this Memcached cluster are all created in a single Availability Zone or created across multiple Availability Zones.
Valid values: single-az
| cross-az
.
This option is only supported for Memcached clusters.
You cannot specify single-az
if the Memcached cluster already has cache nodes in different
Availability Zones. If cross-az
is specified, existing Memcached nodes remain in their current
Availability Zone.
Only newly created nodes are located in different Availability Zones. For instructions on how to move existing Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of Cache Node Considerations for Memcached.
azMode
- Specifies whether the new nodes in this Memcached cluster are all created in a single Availability
Zone or created across multiple Availability Zones.
Valid values: single-az
| cross-az
.
This option is only supported for Memcached clusters.
You cannot specify single-az
if the Memcached cluster already has cache nodes in
different Availability Zones. If cross-az
is specified, existing Memcached nodes remain
in their current Availability Zone.
Only newly created nodes are located in different Availability Zones. For instructions on how to move existing Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of Cache Node Considerations for Memcached.
AZMode
,
AZMode
ModifyCacheClusterRequest.Builder newAvailabilityZones(Collection<String> newAvailabilityZones)
The list of Availability Zones where the new Memcached cache nodes are created.
This parameter is only valid when NumCacheNodes
in the request is greater than the sum of the
number of active cache nodes and the number of cache nodes pending creation (which may be zero). The number
of Availability Zones supplied in this list must match the cache nodes being added in this request.
This option is only supported on Memcached clusters.
Scenarios:
Scenario 1: You have 3 active nodes and wish to add 2 nodes. Specify NumCacheNodes=5
(3 +
2) and optionally specify two Availability Zones for the two new nodes.
Scenario 2: You have 3 active nodes and 2 nodes pending creation (from the scenario 1 call) and want
to add 1 more node. Specify NumCacheNodes=6
((3 + 2) + 1) and optionally specify an Availability
Zone for the new node.
Scenario 3: You want to cancel all pending operations. Specify NumCacheNodes=3
to cancel
all pending operations.
The Availability Zone placement of nodes pending creation cannot be modified. If you wish to cancel any nodes
pending creation, add 0 nodes by setting NumCacheNodes
to the number of current nodes.
If cross-az
is specified, existing Memcached nodes remain in their current Availability Zone.
Only newly created nodes can be located in different Availability Zones. For guidance on how to move existing
Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of
Cache Node
Considerations for Memcached.
Impact of new add/remove requests upon pending requests
Scenario-1
Pending Action: Delete
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending delete.
Scenario-2
Pending Action: Delete
New Request: Create
Result: The new create, pending or immediate, replaces the pending delete.
Scenario-3
Pending Action: Create
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending create.
Scenario-4
Pending Action: Create
New Request: Create
Result: The new create is added to the pending create.
Important: If the new create request is Apply Immediately - Yes, all creates are performed immediately. If the new create request is Apply Immediately - No, all creates are pending.
newAvailabilityZones
- The list of Availability Zones where the new Memcached cache nodes are created.
This parameter is only valid when NumCacheNodes
in the request is greater than the sum of
the number of active cache nodes and the number of cache nodes pending creation (which may be zero).
The number of Availability Zones supplied in this list must match the cache nodes being added in this
request.
This option is only supported on Memcached clusters.
Scenarios:
Scenario 1: You have 3 active nodes and wish to add 2 nodes. Specify
NumCacheNodes=5
(3 + 2) and optionally specify two Availability Zones for the two new
nodes.
Scenario 2: You have 3 active nodes and 2 nodes pending creation (from the scenario 1 call) and
want to add 1 more node. Specify NumCacheNodes=6
((3 + 2) + 1) and optionally specify an
Availability Zone for the new node.
Scenario 3: You want to cancel all pending operations. Specify NumCacheNodes=3
to
cancel all pending operations.
The Availability Zone placement of nodes pending creation cannot be modified. If you wish to cancel
any nodes pending creation, add 0 nodes by setting NumCacheNodes
to the number of current
nodes.
If cross-az
is specified, existing Memcached nodes remain in their current Availability
Zone. Only newly created nodes can be located in different Availability Zones. For guidance on how to
move existing Memcached nodes to different Availability Zones, see the Availability Zone
Considerations section of Cache
Node Considerations for Memcached.
Impact of new add/remove requests upon pending requests
Scenario-1
Pending Action: Delete
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending delete.
Scenario-2
Pending Action: Delete
New Request: Create
Result: The new create, pending or immediate, replaces the pending delete.
Scenario-3
Pending Action: Create
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending create.
Scenario-4
Pending Action: Create
New Request: Create
Result: The new create is added to the pending create.
Important: If the new create request is Apply Immediately - Yes, all creates are performed immediately. If the new create request is Apply Immediately - No, all creates are pending.
ModifyCacheClusterRequest.Builder newAvailabilityZones(String... newAvailabilityZones)
The list of Availability Zones where the new Memcached cache nodes are created.
This parameter is only valid when NumCacheNodes
in the request is greater than the sum of the
number of active cache nodes and the number of cache nodes pending creation (which may be zero). The number
of Availability Zones supplied in this list must match the cache nodes being added in this request.
This option is only supported on Memcached clusters.
Scenarios:
Scenario 1: You have 3 active nodes and wish to add 2 nodes. Specify NumCacheNodes=5
(3 +
2) and optionally specify two Availability Zones for the two new nodes.
Scenario 2: You have 3 active nodes and 2 nodes pending creation (from the scenario 1 call) and want
to add 1 more node. Specify NumCacheNodes=6
((3 + 2) + 1) and optionally specify an Availability
Zone for the new node.
Scenario 3: You want to cancel all pending operations. Specify NumCacheNodes=3
to cancel
all pending operations.
The Availability Zone placement of nodes pending creation cannot be modified. If you wish to cancel any nodes
pending creation, add 0 nodes by setting NumCacheNodes
to the number of current nodes.
If cross-az
is specified, existing Memcached nodes remain in their current Availability Zone.
Only newly created nodes can be located in different Availability Zones. For guidance on how to move existing
Memcached nodes to different Availability Zones, see the Availability Zone Considerations section of
Cache Node
Considerations for Memcached.
Impact of new add/remove requests upon pending requests
Scenario-1
Pending Action: Delete
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending delete.
Scenario-2
Pending Action: Delete
New Request: Create
Result: The new create, pending or immediate, replaces the pending delete.
Scenario-3
Pending Action: Create
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending create.
Scenario-4
Pending Action: Create
New Request: Create
Result: The new create is added to the pending create.
Important: If the new create request is Apply Immediately - Yes, all creates are performed immediately. If the new create request is Apply Immediately - No, all creates are pending.
newAvailabilityZones
- The list of Availability Zones where the new Memcached cache nodes are created.
This parameter is only valid when NumCacheNodes
in the request is greater than the sum of
the number of active cache nodes and the number of cache nodes pending creation (which may be zero).
The number of Availability Zones supplied in this list must match the cache nodes being added in this
request.
This option is only supported on Memcached clusters.
Scenarios:
Scenario 1: You have 3 active nodes and wish to add 2 nodes. Specify
NumCacheNodes=5
(3 + 2) and optionally specify two Availability Zones for the two new
nodes.
Scenario 2: You have 3 active nodes and 2 nodes pending creation (from the scenario 1 call) and
want to add 1 more node. Specify NumCacheNodes=6
((3 + 2) + 1) and optionally specify an
Availability Zone for the new node.
Scenario 3: You want to cancel all pending operations. Specify NumCacheNodes=3
to
cancel all pending operations.
The Availability Zone placement of nodes pending creation cannot be modified. If you wish to cancel
any nodes pending creation, add 0 nodes by setting NumCacheNodes
to the number of current
nodes.
If cross-az
is specified, existing Memcached nodes remain in their current Availability
Zone. Only newly created nodes can be located in different Availability Zones. For guidance on how to
move existing Memcached nodes to different Availability Zones, see the Availability Zone
Considerations section of Cache
Node Considerations for Memcached.
Impact of new add/remove requests upon pending requests
Scenario-1
Pending Action: Delete
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending delete.
Scenario-2
Pending Action: Delete
New Request: Create
Result: The new create, pending or immediate, replaces the pending delete.
Scenario-3
Pending Action: Create
New Request: Delete
Result: The new delete, pending or immediate, replaces the pending create.
Scenario-4
Pending Action: Create
New Request: Create
Result: The new create is added to the pending create.
Important: If the new create request is Apply Immediately - Yes, all creates are performed immediately. If the new create request is Apply Immediately - No, all creates are pending.
ModifyCacheClusterRequest.Builder cacheSecurityGroupNames(Collection<String> cacheSecurityGroupNames)
A list of cache security group names to authorize on this cluster. This change is asynchronously applied as soon as possible.
You can use this parameter only with clusters that are created outside of an Amazon Virtual Private Cloud (Amazon VPC).
Constraints: Must contain no more than 255 alphanumeric characters. Must not be "Default".
cacheSecurityGroupNames
- A list of cache security group names to authorize on this cluster. This change is asynchronously
applied as soon as possible.
You can use this parameter only with clusters that are created outside of an Amazon Virtual Private Cloud (Amazon VPC).
Constraints: Must contain no more than 255 alphanumeric characters. Must not be "Default".
ModifyCacheClusterRequest.Builder cacheSecurityGroupNames(String... cacheSecurityGroupNames)
A list of cache security group names to authorize on this cluster. This change is asynchronously applied as soon as possible.
You can use this parameter only with clusters that are created outside of an Amazon Virtual Private Cloud (Amazon VPC).
Constraints: Must contain no more than 255 alphanumeric characters. Must not be "Default".
cacheSecurityGroupNames
- A list of cache security group names to authorize on this cluster. This change is asynchronously
applied as soon as possible.
You can use this parameter only with clusters that are created outside of an Amazon Virtual Private Cloud (Amazon VPC).
Constraints: Must contain no more than 255 alphanumeric characters. Must not be "Default".
ModifyCacheClusterRequest.Builder securityGroupIds(Collection<String> securityGroupIds)
Specifies the VPC Security Groups associated with the cluster.
This parameter can be used only with clusters that are created in an Amazon Virtual Private Cloud (Amazon VPC).
securityGroupIds
- Specifies the VPC Security Groups associated with the cluster.
This parameter can be used only with clusters that are created in an Amazon Virtual Private Cloud (Amazon VPC).
ModifyCacheClusterRequest.Builder securityGroupIds(String... securityGroupIds)
Specifies the VPC Security Groups associated with the cluster.
This parameter can be used only with clusters that are created in an Amazon Virtual Private Cloud (Amazon VPC).
securityGroupIds
- Specifies the VPC Security Groups associated with the cluster.
This parameter can be used only with clusters that are created in an Amazon Virtual Private Cloud (Amazon VPC).
ModifyCacheClusterRequest.Builder preferredMaintenanceWindow(String preferredMaintenanceWindow)
Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period.
Valid values for ddd
are:
sun
mon
tue
wed
thu
fri
sat
Example: sun:23:00-mon:01:30
preferredMaintenanceWindow
- Specifies the weekly time range during which maintenance on the cluster is performed. It is specified
as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a
60 minute period.
Valid values for ddd
are:
sun
mon
tue
wed
thu
fri
sat
Example: sun:23:00-mon:01:30
ModifyCacheClusterRequest.Builder notificationTopicArn(String notificationTopicArn)
The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications are sent.
The Amazon SNS topic owner must be same as the cluster owner.
notificationTopicArn
- The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications are sent. The Amazon SNS topic owner must be same as the cluster owner.
ModifyCacheClusterRequest.Builder cacheParameterGroupName(String cacheParameterGroupName)
The name of the cache parameter group to apply to this cluster. This change is asynchronously applied as soon
as possible for parameters when the ApplyImmediately
parameter is specified as true
for this request.
cacheParameterGroupName
- The name of the cache parameter group to apply to this cluster. This change is asynchronously applied
as soon as possible for parameters when the ApplyImmediately
parameter is specified as
true
for this request.ModifyCacheClusterRequest.Builder notificationTopicStatus(String notificationTopicStatus)
The status of the Amazon SNS notification topic. Notifications are sent only if the status is
active
.
Valid values: active
| inactive
notificationTopicStatus
- The status of the Amazon SNS notification topic. Notifications are sent only if the status is
active
.
Valid values: active
| inactive
ModifyCacheClusterRequest.Builder applyImmediately(Boolean applyImmediately)
If true
, this parameter causes the modifications in this request and any pending modifications
to be applied, asynchronously and as soon as possible, regardless of the
PreferredMaintenanceWindow
setting for the cluster.
If false
, changes to the cluster are applied on the next maintenance reboot, or the next failure
reboot, whichever occurs first.
If you perform a ModifyCacheCluster
before a pending modification is applied, the pending
modification is replaced by the newer modification.
Valid values: true
| false
Default: false
applyImmediately
- If true
, this parameter causes the modifications in this request and any pending
modifications to be applied, asynchronously and as soon as possible, regardless of the
PreferredMaintenanceWindow
setting for the cluster.
If false
, changes to the cluster are applied on the next maintenance reboot, or the next
failure reboot, whichever occurs first.
If you perform a ModifyCacheCluster
before a pending modification is applied, the pending
modification is replaced by the newer modification.
Valid values: true
| false
Default: false
ModifyCacheClusterRequest.Builder engineVersion(String engineVersion)
The upgraded version of the cache engine to be run on the cache nodes.
Important: You can upgrade to a newer engine version (see Selecting a Cache Engine and Version), but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster and create it anew with the earlier engine version.
engineVersion
- The upgraded version of the cache engine to be run on the cache nodes.
Important: You can upgrade to a newer engine version (see Selecting a Cache Engine and Version), but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster and create it anew with the earlier engine version.
ModifyCacheClusterRequest.Builder autoMinorVersionUpgrade(Boolean autoMinorVersionUpgrade)
This parameter is currently disabled.
autoMinorVersionUpgrade
- This parameter is currently disabled.ModifyCacheClusterRequest.Builder snapshotRetentionLimit(Integer snapshotRetentionLimit)
The number of days for which ElastiCache retains automatic cluster snapshots before deleting them. For
example, if you set SnapshotRetentionLimit
to 5, a snapshot that was taken today is retained for
5 days before being deleted.
If the value of SnapshotRetentionLimit
is set to zero (0), backups are turned off.
snapshotRetentionLimit
- The number of days for which ElastiCache retains automatic cluster snapshots before deleting them. For
example, if you set SnapshotRetentionLimit
to 5, a snapshot that was taken today is
retained for 5 days before being deleted.
If the value of SnapshotRetentionLimit
is set to zero (0), backups are turned off.
ModifyCacheClusterRequest.Builder snapshotWindow(String snapshotWindow)
The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your cluster.
snapshotWindow
- The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your cluster.ModifyCacheClusterRequest.Builder cacheNodeType(String cacheNodeType)
A valid cache node type that you want to scale this cluster up to.
cacheNodeType
- A valid cache node type that you want to scale this cluster up to.ModifyCacheClusterRequest.Builder requestOverrideConfig(AwsRequestOverrideConfig awsRequestOverrideConfig)
AwsRequest.Builder
requestOverrideConfig
in interface AwsRequest.Builder
awsRequestOverrideConfig
- The override configuration.Copyright © 2017 Amazon Web Services, Inc. All Rights Reserved.